(170-2213/4) NAM Programming 

The 170-2213 and the 170-2214 are both the same telephone. The only 
difference is where they are sold. 

NOKIA 2170 SERIES CELLULAR TELEPHONE NAM PROGRAMMING INSTRUCTIONS 

NOKIA 2170 cellular telephones are capable of supporting authentication. 
To change the value of the A-Key, the programmer must use the Complete NAM 
Programming Instructions presented lower on this sheet, or by following 
the industry procedure identified in TSB-50. Use the complete NAM 
programming Instructions when advanced programming options require 
modifications to advanced programming parameters. The clear key can be 
used to correct mistakes. 

MENU DRIVEN EASY NAM PROGRAMMING FOR NOKIA 2170 HANDPORTABLES 

#639# : 1. Turn on Phone and Enter Access Code. 
*#639# 

Phone : 2. Enter the 10 Digit Area Code and Phone Number and Press 
Number the TALK Key (or the 'OK' softkey in display). 

SID & : 3. Enter System ID Code (SID) Supplied by the Service 
options Provider (1-5 Digit SID) and Press The TALK (or 'OK') 
Key. 

Optional Settings are Language and Lock Code (See below). 

SAVE : 4. Press OK to Store new values. 
CHANGES? 

ACTIVATION : Programming is Completed. 
OK 
Phone Automatically Powers Off and Then Back On. 

NOTE: Change the Lock code by adding a pound sign and new lock code after 
the SID. (Example: 42#7788: Lock code = 7788). 

Change the Language by adding a pound sign and new language code 
after the code (Example: 42#2: Language = Spanish). 

Language Code: 0 (default) = English. 1 = French and 2 = Spanish. 

Change the Lock Code and Language code by separating each set of 
numbers by a pound sign (Example: 42#7788#2: Where the SID = 0042, 
Lock Code = 7788 and Language = Spanish). 

COMPLETE NAM PROGRAMMING INSTRUCTIONS 

ACCESS NAM PROGRAMMING MODE: 

1. Turn the phone on. Enter the NAM access code. Factory default is 
# 3 0 0 1 # 1 2 3 4 5 [Menu]. 

2. If this screen appears, you have entered NAM programming mode. 
_________________ 
| Init lock | 
| > NAM 1 | 
| Change SPC | 
|_________________| 

Note: If this screen does not appear after several attempts, then the 
access code has been changed and the phone must be returned to 
the original purchase location for programming. Press the 
[Select] softkey to modify the data to the right of the pointer. 

MAIN MENU SELECTION 

3. Press the [Arrow-Key] up or down until the indicator points at the 
desired menu option. 

NAM 1 Change SPC Security Emergency SW version 
Serial No. Init lock 

4. Press the [Select] softkey to access the Sub-Menu from any of the 
above Main Menu selections. The chart below is a reference of the 
available after highlighting NAM 1 and pressing the [Select] softkey. 

PROGRAMMING NAM 1: 

5. Press the [Arrow-Key] to scroll through the selected NAM list of 
parameters. All available setting options are shown below. 

6. To change the displayed value, press the [Select] softkey and use the 
numeric keypad to make any changes. 

NAM MENU Default Val. CDMA Default Val. DEFAULT Default Val. 
SETTINGS SETTINGS 

HOME 2 NETWORK CODE 0 DIRECTORY 0000000000 
SYSTEM NUMBER 
ID 

OWN 0000000000 COUNTRY 310 NAM STATUS Enabled 
NUMBER CODE 

CDMA Sub-Menu ACCESS 1 
SETTINGS METHOD 

DEFAULT Sub-Menu LOCAL 1 
SETTINGS OPTION 

NETWORK 0 GROUP ID 10 
ID 
A-KEY CODE Dependent 

7. Use the [OK] softkey to store the new information that has been 
entered. 

8. Repeat steps 6 through 8 for the remaining NAM parameter options to be 
viewed and/or changed. 

PROGRAMMING THE SECURITY CODE: 

9. From the Main Menu, use the [Arrow-Key] to select the Security 
Sub-Menu, press [Select] and the current 5-digit security code will 
appear in the display. Default is 12345. 

10. To change the Security Code, use the numeric keys to enter the new 
value. 

11. Press the softkey [OK] to store changes. 

Note: Changing the Security Code automatically changes the Lock Code to 
the last 4-digits of the new Security Code. 

PROGRAMMING EMERGENCY NUMBERS: (Optional): 

12. From the Main Menu use the Arrow-key to select the Emergency Sub-Menu, 
press the [Select] softkey. Default values are: 
EMERGENCY NUMBER 1 (911) / EMERGENCY NUMBER 2 (*911) / EMERGENCY 
NUMBER 3 (None). 

13. If you wish to change the default value shown above, use the 
[Arrow-Key] to select the emergency number you wish to change and 
press [Select]. Then use the numeric keys to enter the new values. 

14. Press the [OK] softkey to save the value. 

15. Press [QUIT] to avoid saving changes. 

SERIAL NUMBER (ESN): 

16. From the Main Menu, use the arrow-key to display the Electronic Serial 
Number (ESN) of the phone. 

17. Press [Quit] or [OK] to exit the menu. 

A-KEY CODE: (Optional): 

18. Press the [Select] softkey while the "A-Key Code" is displayed. 

19. Enter the new A-Key and check sum that was calculated by the service 
providers' security administrator. 

20. Press [OK] to store the new a-Key value. 

INIT LOCK: 

The INIT LOCK feature is a functionality prohibiting electronic lock that 
prevents the phone from being used. Its operation resembles the Automatic 
Lock feature that is located in the Security Options menu of this product. 
The difference is that once the INIT LOCK set to ON and then unlocked, the 
phone remains unlocked indefinitely. This particular lock function is 
designed to be enabled during NAM programming to support security during 
its distribution to the end-customer. The code to unlock this feature is 
only available from the Service Provider that holds the respective 
subscription. 

FIELD TEST: 

The FIELD TEST MODE is used to investigate how the phone and cellular 
system interact. The FIELD TEST information covers signal strength, 
battery charging status, cellular state and encryption status. The 
information is organized to display information relating to the air 
interface with the network. Pressing ABC during an active display will 
present acronyms in the display to identify the purpose of each data 
field. 

To activate the FIELD TEST mode the phone must be in NAM programming mode. 
Instructions for entering NAM programming are shown above. Use the 
following steps to enable the FIELD TEST mode. 

I. From the Main Menu use the [Arrow-Key] to display the "FIELD TEST" 
menu and press the [Select] soft key. Use the [Arrow-Key] to select 
Enable and press the [OK] softkey. 

II. Turn the 2170 off then back on. Once the power up self test is 
completed, the FIELD TEST display will begin automatically. Scroll 
through the different displays using the [Arrow-Key]. 

To disable the FIELD TEST mode. Return to NAM programming mode and 
disable the function under the FIELD TEST menu. 

EXITING NAM PROGRAMMING: 

21. To exit the NAM programming mode, turn the phone off and leave it off 
for five seconds. Then turn it back on. 



-------------------------------------
Websites:1. http://www.sms2friends.com
         2. http://www.fsmobilez.com
         3. http://www.malik4u.com

Admin    : Zulqarnain Malik
email    : admin@fsmobilez.com
MsN ID   : malikzulqarnain@hotmail.com
Yahoo ID : malikzulqarnain@yahoo.com
Contact  : 0345-9088223
           0321-5779342
                 
          Thank You!!
-------------------------------------